How to Disassemble the Anti-loosening Pivot
1.Remove the scale.
2.Take the Nitrile Rubber O-Ring off
3.Unscrew the anti-loosening pivot.
Tips about the threadlocker and the O-ring
For products without Anti-loosening Pivot, apply threadlocker (blue threadlocker recommended) to the T8 pivot screw before tightening.
Products with Anti-loosening Pivot provide double security for the pivot pin.
However, we still recommend applying threadlocker for enhanced stability, if feasible.
Nitrile Rubber O-Ring: 6 mm inner diameter and a 1.5 mm cross section